Spectrum OS2 User Guide – Litegear Documentation

LiteDimmer^TM

Nudge

Nudge is a local process for making slight and steady adjustments to parameters by using screen-side buttons in place of, or in addition to, using the LEFT encoder. Invoke the feature with a long-press of the LEFT encoder. You can see the lower line of the display now shows incremental adjustments. The operator can now use screen-side buttons to advance the value of the selected parameter in small increments. You may also make use of the LEFT encoder for fast adjustments, then return to small increments as needed. As always, Intensity is available using the RIGHT encoder, as is the Audition feature mentioned before.

1. Set main 3-position switch to the CENTER position

2. Press the function button on the display below ‘SETTINGS’

3. Rotate the left encoder knob to navigate to ‘LOCAL CONTROL’ and press the knob to select it

4. Rotate the left encoder knob to navigate to ‘OPERATION’ and press the knob to select it.

5. Rotate the left encoder knob to select one of the three Operation options.

6. Once Operation option has been selected, turn switch down to control ballast per setting.

7. Now press left encoder and hold till PRESETS and TINT are replaced by parameters units. (ex: CCT-, CCT+)

8. User can now use function buttons to advance the value of the selected parameter in small increments.