LiteDimmerTM MICRO SINGLE

HOW TO OPERATE

HOW TO INSTALL

To install LiteDimmer Micro Single, bring the fader down to 0. Provide DC power between 9V and 24V* to the Barrel input connector. If the “Power” button is red and fading on and off, the dimmer is on standby. If the “Power” button is steady red, the dimmer output is active; tap it once to put it on standby. (Note: LiteDimmer Micro Single will remember the last saved settings on power-up; settings are saved by waiting for 5 seconds after making a change. For instance, if you put the dimmer on standby, you must wait at least 5 seconds before disconnecting the dimmer from power, or the dimmer will not remember that you put it on standby, resulting in an active output on the next power-up.) Now, connect the load to the Barrel output connector. Be sure you observe current capacities of all components such as cable, connectors, and power supplies and that your load is under 4 amps. You are now ready to operate your LiteDimmer Micro Single.

*Note: Power supply voltage must match the rating of the LiteRibbon, or damage may occur.

HOW TO SET LEVELS

With the dimmer on standby, tap the “Power” button once to activate the output. Use the fader to control brightness. Your single-color LiteRibbon should now be operating and will be dim or bright depending on the level chosen. The enclosure shows output level in percentage to the left of the fader.